Ultrasonic Distance Sensor for Bit:Bot Classic

The TTS Pi2Go is a Raspberry Pi controlled robot designed to unleash the power of Raspberry Pi in your classroom. The TTS Pi2Go is Raspberry Pi Model B and B+ compatible and can be controlled using Scratch or Python. As it comes pre-assembled all you need to do is mount your Raspberry Pi and start programming. The transparent case not only protects the components but also allows you to see what is happening as it follows the commands of your on screen programming. With a wide range of inputs and outputs to program, the TTS Pi2Go is the ultimate programmable robot and is perfect for project based work. Let the students design, plan and write their program and once they're confident it'll work, try it out on the Pi2Go! The Pi2Go can be controlled and programmed wirelessly using Wifi or programs can be downloaded onto Pi2Go using the USB drive. Individually program and monitor the various inputs and outputs (line follower, ultra-sonic sensor, RGB LEDs, motors, light sensor) Input sensors allow user to control variables such as distance and light Interact via Wifi or loading your program directly on to Pi2Go via USB Compatible with Scratch and Python programming languages Raspberry Pi Camera can be attached Example programs provided to get you started An online support site to discover the best way to get the most out of Pi2Go Pre-assembled Transparent protective case also keeps components secure Enhance Computing lessons with real life application of programming Write your program on screen and see Pi2Go come to life Suitable for KS2 upwards The Ultimate kit includes: Pi2Go Robot Micro SD card and adapter (pre-loaded with Pi2Go software) Raspberry Pi Model B+ WiFi Dongle 4GB USBMemory Stick The Pi2Go additionally requires 6 AA batteries.

This pre-built Edge Connector Breakout Board for the BBC micro:bit gives access to all the important pins on the bottom edge of the BBC micro:bit. Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit. This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total; providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.  The BBC micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required. To use the breakout board the BBC micro:bit should be inserted firmly into the connector as shown below:

Deliver high-accuracy results with the LEGO® Technic™ Distance Sensor, featuring 1-200cm range, +/- 1cm accuracy, programmable LED ‘eyes’ and an integrated 6-pin adaptor for third-party sensors, boards and DIY hardware. Sound wave sensor features 1-200cm range with +/- 1cm accuracy for accurate, repeatable results.  Programmable LED ‘eyes’ add life to any build.  Integrated industry-standard interface for third-party sensors, boards and DIY hardware.  Simple form factor for quick building and rebuilding.