This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up. The LilyPad Rainbow LED features seven individual LEDs in six unique colors (Red, Blue, Green, Yellow, Pink, and White). Text has been added to the back of each board to indicate its color. Due to popular request, we have included two white LEDs instead of just one. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

Die elektrische Farbe von Bare Conducive Electric Paint verhält sich ähnlich wie wasserlösliche Farbe, ist aber elektrisch leitfähig. Das heisst, dass Leiterbahnen oder Sensoren direkt auf eine Vielzahl von Materialien gezogen werden können. Dazu gehören Papier, Holz, Plastik und Glas. Ähnlich wie gewöhnliche wasserlösliche Farbe, kann die elektrische Farbe zum Malen, Siebdruck, Schablonieren oder Aquarellieren verwendet werden.

Dieses Set von Nadeln ist ein Muss, wenn Sie Ihr nächstes E-Textil-Projekt zusammennähen. Jeder Umschlag enthält drei 48 mm, 1,23 mm dicke Nadeln und zwei kleinere 39 mm, 0,67 mm dicke Nadeln. Das Auge jeder Nadelgrösse ist gross genug, um mit unserem leitfähigen Faden problemlos eingefädelt zu werden.

This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)! Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

Schüler:innen lernen spielerisch die Grundprinzipien eines Elektromotors kennen, indem sie in kurzer Zeit einen funktionierenden Motor eigenhändig zusammen bauen (Montageanleitung). Die 15 Einzelteile werden in einem Pappkarton (Länge: 12,5 cm, Breite 7,5 cm, Höhe 1,5 cm) geliefert, dessen Deckel gleichzeitig zum Aufbau des Motors dient und mit Anleitung hierfür bedruckt ist. Der Aufbau auf ein Holzbrett oder Plexiglas ist ebenfalls möglich. Das fertiggestellte Modell läuft mit Hilfe einer 4,5 Volt Flachbatterie. Dieser Bausatz Elektromotor ist ein naturgetreues, funktionierendes Modell eines Elektro-Motors und somit das ideale Hilfsmittel für den Technik- und Physikunterricht. Lehrkräfte und Schüler:innen sind gleicher Weise von diesem verblüffend einfachen, interessanten und lehrreichen E-Motor begeistert. Die Schüler:innen lernen spielerisch die Grundprinzipien eines Elektromotors kennen, indem sie in kurzer Zeit einen funktionierenden Motor eigenhändig zusammen bauen (Montageanleitung vorhanden). Ohne Batterie

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat. What sets this thread apart from the other conductive thread that we carry is the fact that it’s actually spun from 12UM stainless steel fiber making it incredibly smooth and without the loose hairs seen on other bobbins. This means that while it may not be easy to solder to, because it’s stainless, it also won’t burn up when you touch it with a soldering iron. Suitable for hand or machine sewing (as a bobbin thread). We’ve had no trouble using it for close, tight connections, but if you’re worried, waxing the thread should keep it manageable!

Unser LED-Wechselblinker besteht aus einem astabilen Multivibrator. Multivibrator bedeutet Vielfachschwinger und das weist auf eine Schaltung hin, die ohne äusseren Anstoss frei schwingt. Nach anlegen der Batterie beginnen die LED`s (5mm) abwechselnd zu blinken. Versorgungsspannung mit einer 9V-Batterien. Der LED-Wechselblinker Bausatz HS1 enthält alle elektronischen Bauteile für 1 Schüler mit einer Funktionsbeschreibung, Bauanleitung/Bauplan mit Schaltplan.    Bauteile Stückliste 1 Holzbrett 80mm x 80mm, 4 Widerstände, 14 Reißnägel, 2 Transistoren, 2 Elkos, 2 LED 5mm, 20cm Brückendraht blank, 10cm Schaltdraht isoliert. 1 9V-Batterie-Clip, 1 Bauanleitung 2xDIN A4.    Technische DatenBetriebsspannung: 9-15V/DC,  Stromaufnahme: 30mA, Abm.: (L xB) 80mm x 80mm. Der Aufbau des Bausatzes dauert etwa 45 Minuten   Allgemeines Alle Bausätze der Baureihe HS... werden mit Reisszwecken (Reissnägel) auf einem Holzbrettchen aufgebaut. Die Bauteile und Verbindungen werden auf die Reissnägel gelötet, welche vorher in das Holzbrett gedrückt wurden. Die Reissnägel dienen als Lötstützpunkt, d.h. man lötet alle Bauteile mit ihren Anschlussbeinchen sowie die Drahtverbindungen nach der Bestückungsvorlage auf den Reisszwecken (Reissnägelköpfen) fest. 

Electro-Fashion, Latching Switch Coin Cell Holder. Includes a 3V coin cell battery holder and latching switch on the same PCB. This provides power and switch capabilities to an e-textiles project on the same board. The switch latches; you press once to turn the power on and press again to turn the power off. Ideal as a built-in switch and power source for e-textile projects. Features: Built-in 3V Coin Cell Holder. Latching switch for switching circuit on and off. Contents: 1 x Electro-Fashion, Latching Switch Coin Cell Holder. Dimensions: Length: 44mm. Width: 28mm. Height: 5mm.

This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread. These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off. It uses a very thin PCB material to keep its size to a minimum.This allows it to be easily incorporated into your own e-textiles designs. Caution: This coin cell holder contains Nickel and should not be used in designs where it will be in prolonged contact with the skin. The board accepts CR2032 batteries. Dimensions: L44 x W20 x H4.5mm

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. ** Please note:** This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it's come to our attention that washing these buzzers will damage them. Until we've figured out a solution to this, avoid washing any portion of your project that contains one of these buzzers. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.   LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)!   Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32U4 on LilyPad USB Plus at the heart of the board. Once you’ve installed the software, you’ll be able to write and upload your own programs to the board, making it do almost anything you want. At the center of the ProtoSnap Plus is the LilyPad USB Plus microcontroller, pre-wired to a LilyPad board including a LilyPad Light Sensor, LilyPad Buzzer, LilyPad Button Board, four pairs of colored LilyPad LEDs and a LilyPad Slide Switch. Because these components are connected together on the ProtoSnap board, you can test out your project ideas before you sew. The ProtoSnap Plus also includes expansion ports that let you sew your wearables together or use alligator cables to easily connect external sensors and components. After testing out your coding ideas using the attached LilyPad pieces, you can break apart the prototyping board and sew them into your project! Please be aware that the Lilypad ProtoSnap Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.   LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available. They're even washable (with special care)!   Note: A portion of this sale is given back to Dr. Buechley for continued development and education in e-textiles.

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply JST (and recharge circuit) and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB Plus being a micro-USB cable. We’ve also added an RGB LED in the dead-center of the board along with six white LEDs to act as a sort of bar graph. The LilyPad USB Plus was designed to streamline your next sewable project by keeping things simple and giving you more room to work while eliminating the need to sew a power supply. It has fourteen sew tabs for connecting components with conductive thread. Four of these tabs are reserved for connecting power and ground of LilyPad sensors and accessory boards, and ten are input/output (I/O). For reference, each sew tab has a nearby label with its name and the pin number it is connected to on the ATmega32U4 chip at its center. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available in the LilyPad line but will also work with most other wearable e-textile lines. They’re even washable! Please be aware that the Lilypad USB Plus is NOT supported on Windows 7/8 due to a lack of support drivers for those specific OS’s. Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education in e-textiles.

The Fizzbit, designed by The Crafty Robot, is a way to bring movement and excitement to mini-figures of your own invention. It is a small module containing a vibration motor, super capacitor and USB plug, which can plug directly into a computer or USB power supply (no batteries required). You slot your Fizzbit into a mini-figure (made from paper or 3D printed), turning it into a Fizzbot. How to make your mini-figures move with fizzbit.  Create your 3D printed or paper robot. Plug the Fizzbit module directly into a computer or USB power supply. Your Fizzbot can now battle, race and dance around!. The kit charges in approximately 20 seconds. Fizzbots can battle, race and dance around. Pre-built kit, no soldering required. Features: Rechargeable vibrating robot. Contents: 1 Pre-built Fizzbit Module  Dimensions: Length: 49mm. Width: 16mm. Height: 16mm. Requires: Paper or 3D printed mini-figure.

Eine problemlos aufzubauende Schaltung. Der Elektronische Mücken - Vertreiber erzeugt Frequenzen, die von weiblichen Stechmücken gemieden werden. Der Bausatz mit gebohrter oder ungebohrter Leiterplatte enthält alle elektronischen Bauteile für 1 Schüler mit einer Funktionsbeschreibung, Bauanleitung/Bauplan mit Schaltplan. Die Bauteile sind pro Bausatz in je einem PVC-Beutel verpackt. Technische Daten: Betriebsspannung: 4,5-9V/DC Stromaufnahme: 10mA Abmessung: (L xB) 49mm x 47mm Stückliste: 1 Leiterplatte gebohrt oder 1 Leiterplatte ungebohrt (Je nach Auswahl) 6 Widerstände 1 Diode 2 Kondensator 2 Transistoren 1 Einstellwiderstand 1 Signalgeber 5cm Anschluss-Litze 1 Schalter 9V-Clip 1 Aufbau- und Schaltungsbeschreibung A4 9 V Batterie nicht enthalten Benötigtes Werkzeug: Lötkölben ca. 30 Wattt, Lötzinn, Seitenschneider

Decoflex is a jointed sheet of veneer measuring 300mm x 200mm that is extremely easy to work with. The jointed veneer sheet is first pressed onto paper. The wood fibres are then broken and finally it is also pre-sanded with a 150 grain. This gives a flexible sheet of high quality wood veneer. The rear face of the veneered sheet is covered in a paper backing that is a similar colour to the chosen wood. These veneered sheets can easily be cut with a knife or laser cutter.

Alle benötigten Materialien, um ein komplettes Solarauto für den Junior Solar Sprint Wettbewerb zu bauen! Das 10er-Paket enthält Materialien für den Bau von 10 Ray Catcher-Fahrzeugen und zwei Solarzellen, die Studenten gemeinsam nutzen. Die Konstruktion erfordert Lötkolben und Lötkolben, Hobbymesser, Kühlschmelzklebepistole und Kleber, Nadel-Nasen-Zange und ein Lineal, die separat verkauft werden. Zusätzliche Sonnenkollektoren, falls erforderlich, können erworben werden.  

This Bulk Pack of 3mm Opaque Perspex Acrylic Sheets contains nine sheets, each measuring 297mm x 210mm (A4). The surfaces of the sheets have a high gloss finish. You cannot see through opaque Perspex sheets meaning they can be used in designs/products to provide areas of solid colour.

An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispenser box. Sit this on your workbench and stop worrying about having a piece of wire around!

This is Kitronik's very own Electro-Fashion® branded Conductive Thread and we think it is among the best conductive thread available. It is perfect for hand sewing and can also be used on the bottom bobbin of a sewing machine (this will require the thread to be wound on to the smaller bottom bobbin first). Conductive thread can be used like conventional sewing yarn, however it electrically conducts allowing electronics to be integrated into textiles. This makes it ideal for use in a range of e-textile applications. The thread is nano plated with silver to make it conductive. The conductive thread has a generally low resistance but it does vary. We have measured between 40 and 160 ohms per meter, depending on the tension the thread is under. Once sewn the resistance is typically in the middle of this range. Over time the silver plating will degrade particularly if washed and we have measured in excess of 280 ohms on some of our older examples. Resistance does not vary significantly from one length of thread to the next, so you should be able to use this thread without concern for "dead" sections. The conductive thread has a breaking strain of around 9.3 pounds (4.2 kilos). It comprises roughly 96 individual filaments, each coated with a micron-thick layer of natural silver. This plating of the yarn is done in Europe to ensure as high a quality finish as possible. In construction, 16 of these filaments are wound together to form an initial twist; two of these twists are then twisted together, and finally three of these twists are combined to form the finished thread. The conductive thread is approximately 18 denier. It is heavier than a regular sewing thread, but not as heavy as an upholstery thread. It can be sewn on most domestic sewing machines using either a regular needle or the next size up. This thread does not fray. Features: No (or very low) fray. Conductivity = approximately 40Ω per metre (12.2Ω per foot). Count = 875 dTex. Strength 3000 cN. Elongation at break = 37%. Twist = 240Z-380S. Contents: 1 x Reel Electro-Fashion®, Conductive Thread, 250m.

BeschreibungFür viele Zwecke braucht man mal eben schnell einen kleinen Verstärker mit etwas Power. Dieser Universal-Verstärker-Bausatz mit einer Musik-Spitzenleistung von 5 Watt ist dafür hervorragend geeignet. Der Bausatz mit gebohrter Leiterplatte enthält alle elektronischen Bauteile für 1 Schüler:in mit einer Funktionsbeschreibung, Bauanleitung/Bauplan mit Schaltplan. Die Bauteile sind pro Bausatz in je einem PVC-Beutel verpackt.  Stückliste 1 Leiterplatte gebohrt 4 Widerstände 1 Diode 1 IC 1 Kühlkörper 1 Kondensator 5 Elkos 1 Einstellwiderstand mit Achse 1 Schraube und Mutter 6 Lötstifte 1 Aufbau- und Schaltungsbeschreibung, A4 Batterie ist im Materalsatz nicht enthalten. Technische Daten Betriebsspannung: 8-18VDC Stromaufnahme: 0,5A Abmessung: (L xB) 61mmx55mm Allgemeines Der Bausatz hat eine gebohrte Leiterplatte mit geätztem, verzinntem Leiterbild. Alle Bautele des Bausatzes sind in Industriequalität und pro Bausatz in einem PVC-Beutel verpackt. Benötigtes Werkzeug Lötkölben ca. 30 Wattt Lötzinn Seitenschneider (Elektronik Schere HT109)

Der Band «Freizeit, Mode, Wohnen» des Handbuchs für Lehrpersonen umfasst 25 Unterrichtsvorhaben mit vielen herausfordernden Aufgabenstellungen zu den drei Themenfeldern «Spiel /Freizeit», «Mode / Kleidung» und «Bau / Wohnbereich» und dient der konkreten Planung und Durchführung des Unterrichts im Textilen und Technischen Gestalten. Differenzierte Angebote fördern die Konstruktions- und Gestaltungsfähigkeiten der Schülerinnen und Schüler gemäss ihrem Lernstand auf individuelle, entdeckende und rezeptive Art. Themen und Inhalte werden spiralförmig und gemäss den Kompetenzstufen des Lehrplans 21 aufgebaut. Im 2. Zyklus werden fachliche und methodische Grundlagen erworben, welche im 3. Zyklus weitergeführt, ergänzt und vertieft werden. Dieser Band widmet sich speziell dem Textilen Gestalten sowie den im Band «Spiel, Mechanik, Energie» nicht abgedeckten Themenfeldern. Die Unterrichtsvorhaben sind praxiserprobt und initiieren einen kompetenzorientierten Unterricht. Die Lehrmittelreihe «Technik und Design» für Technisches und Textiles Gestalten ist in Zusammenarbeit mit Expertinnen und Experten aus Fachwissenschaft, Didaktik und Praxis entstanden und orientiert sich am Lehrplan 21. Die vier Bände thematisieren die Erschliessung von Technik und Design. Das Konzept der Reihe ist auf einen mehrperspektivischen Unterrichtsansatz ausgerichtet und integriert fachübergreifende Bezüge zu «Natur, Mensch, Gesellschaft» sowie zu «Medien und Informatik». Die Reihe setzt sich wie folgt zusammen: Für Lehrpersonen  Grundlagen Handbuch für Lehrpersonen Spiel, Mechanik, Energie Handbuch für Lehrpersonen Freizeit, Mode, Wohnen Für Lernende Lernheft Lernapp für Smartphone und Tablet Auf der Lehr- und Lernplattform www.technikunddesign.ch stehen Zusatzmaterialien für Lehrpersonen und Lernende zur Verfügung. Autor: Stuber, Thomas    Sprache: Deutsch Verlag: hep Verlag Erscheinungsjahr: 2017 Ausführung: Fester Einband Seitenangabe: 400 S.  

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor. LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable! Note: A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.